LEYCO®-RASANT 2: Product-No. 20.173
LEYCO®-RASANT 2 is an automatic cleaner, which quickly removes the traffic film, grease, wax and organic residue that settles on to vehicles and tarpaulines.
LEYCO®-RASANT 2 removes an electrostatic sealing film and helps to protect against exhaust gases, diesel smoke, dust and carbon.
LEYCO®-RASANT 2 will protect against further recontamination of vehicles.
LEYCO®-RASANT 2 is particularly suitably for the freight forwarding business, transporters, buses and all public means of transport. Tanker, silo and refuse lorries, construction machines, ready-mix concrete mixers, excavators, cranes, containers, power lift trucks, campers and all types of vessels.
LEYCO®-RASANT 2 can also be used to prepare surfaces before they are repainted or treated.
Colour: clearly / green-yellowish
Spec weight: 1.04
pH value: approx. 13
Storage: Protect from frost. Shelf life over 12 months in sealed containers
Note: Not combustible
Wet the surfaces that need cleaning with LEYCO®-RASANT 2.
LEYCO®-RASANT 2 should then be mixed between 1:5 and 1:30 with water, and sprayed on to the surface from the bottom up. Leave the product to react on the surface but do not allow it to dry. Then rinse off with plenty of clean water. Rinse off from the top working down. This avoids streaking.
In car washes the LEYCO®-RASANT 2 should be mixed at a ratio of 1:5 so that the final dilution when sprayed is at 1:10.
When used in steam cleaners the dilution of LEYCO®-RASANT 2 can be lower than 1:30, up to 1:50, but again wash off with plenty of clean water and do not allow the material to dry.
Vehicles should be never washed in a frost or strong sunlight.
Never allow LEYCO®-RASANT 2 to dry.