Leyco Chemische Leyde GmbH

Contact us

Industriestr. 155 | D - 50999 Köln
+49 (0)2236 966000
sales@leyde.com

mobile-logo
Top

LEYCO®- RASANT

Leyco Chemische Leyde GmbH / LEYCO®- RASANT

LEYCO®- RASANT: Product-No. 20.172

  • Cleans strong contaminations such as grease and carbon, leaving shining surfaces
  • Leaves an electrostatic film that helps maintain a clean appearance
  • Phosphate-free - environmentally friendly
  • Reduces the need for manual cleaning - ideal for commercial cleaning
  • Applicably on all painted areas

Download technical data sheet

LEYCO®- RASANT

HIGH SPEED CLEANER FOR VEHICLES AND TARPAULINS

LEYCO-RASANT is a new generation vehicle cleaner.
LEYCO-RASANT breaks through the electrostatic layer that binds road dirt such as exhaust gases, diesel stains, dust, soot and greases to the vehicle surfaces.
LEYCO-RASANT helps to protect against new contamination by leaving an anti static layer.
LEYCO-RASANT can be used not only on vehicles but on tarpaulins, tents, construction machinery etc…
Each new application of LEYCO-RASANT leads to stronger gloss.

  • Cleans strong contaminations such as grease and carbon, leaving shining surfaces
  • Leaves an electrostatic film that helps maintain a clean appearance
  • Phosphate-free – environmentally friendly
  • Reduces the need for manual cleaning – ideal for commercial cleaning
  • Applicably on all painted areas

LEYCO-RASANT cuts working times – no scrubbing

LEYCO-RASANT has been developed through close teamwork with our successful partners in the construction industry.
Profit from the positive experience of your industrial partners or your competition!

AREAS OF APPLICATION

All washable surfaces e.g. forwarding business vehicles, transporter, buses and all public means of transport, tankers, silo and refuse lorries, construction machines, ready-mix concrete mixers, excavators, cranes, containers, power lift trucks, campers and all types of vessels.
LEYCO-RASANT will remove films of varnish, Silicone, waxes and layers of oxidation.
LEYCO-RASANT is also suitable for the preparation of surfaces before repainting or treatment.

DESCRIPTION

The traffic film that settles on vehicles is a mixture of exhaust gases, diesel stains, dust, carbon, waxes and greases. An electrostatic layer holds this dirt tight to the vehicle, chassis or tarpaulin surface. Conventional cleaning agents can only release this layer with the help of brushes, because even high pressure unit fail to remove it effectively.
LEYCO-RASANT breaks through this electrostatic film without manual processes, so that it can be easily hosed down.
Recontamination is also decreased by the use of LEYCO-RASANT, because it leaves a protective film on the surface that makes the cleaned areas seem polished.

BENEFITS
  • strong cleaning power – non ionic tensides breaks down the electrostatic film
  • cuts working times – no scrubbing
  • very economical – dilute 1:5 – 1:30 depending on degree of dirt
  • environmentally friendly – 90% of cleaning tensides are biodegradable does not contain phosphates, non combustible
  • is not subject to the regulation over dangerous working materials
TECHNICAL DATA

Colour: clearly
Spec weight: 1,04
Bearing: Protect from frost. Keep in sealed containers
Note: Non combustible

OPERATING INSTRUCTION

Wet the surfaces that are to be cleaned with LEYCO®-RASANT.
Mix the LEYCO-RASANT with between 5 and 30 parts water depending upon degree of dirt. Apply this dilution, using a sprayer to the surface, allowing it to react but not to dry. Apply this solution from the ground up. Follow this process by washing the
LEYCO-RASANT off the surface with plenty of clean water.
For car washes, mix LEYCO-RASANT in a solution of 1:5 with water, so that the final dilution rate, applied to the vehicles is 1:10.
LEYCO-RASANT can be used in both hot and cold high pressure cleaners, again the dilution rate depends up on the degree of dirt.

IMPORTANT NOTES

Avoid washing vehicles in frost or strong sunlight.
Do not allow LEYCO®-RASANT to dry to the surface.