LEYCO®-SPL: Product-No. 20.202
LEYCO®-SPL is used to remove heavy deposits of resin from surfaces when they are dipped in a solution of it, or when it is applied through specialist high pressure washers.
LEYCO®-SPL works extremely fast, thorough and economical, since it can be diluted with 3 to 10 parts water.
Due to its special composition the LEYCO®-SPL does not develop dangerous vapors.
LEYCO®-SPL is used as a dilution in dips as a heavy-duty resin remover. It is used in ultrasonic baths as well as in special automatic washing machines.
LEYCO®-SPL is a concentrated, strongly alkaline cleaner with wetting agents and dirt removing additives.
Density: 1,36 g/cm3
Appearance: brownishly, clearl
Dilution: 1:3 to 1:10
pH value: 14
LEYCO®-SPL can be diluted with 3 to 10 parts water depending on the degree of pollution.
LEYCO®-SPL can be used in the dipping process in ultrasonic baths, as well as in special automatic washing machines.
Do not store with acids or acid based products. Keep in tightly sealed containers.
Minimum shelf-life 30 months.
LEYCO®-SPL causes veraetzungen. Keep out of reach of children. Keep away from food and drink. Wear suitable PPE, including eye protection. Immediately rinse off any splashes to the skin or eyes with plenty of clean water.
UBA-No.: 0595 – 0050