LEYCO®-PROTECT 6: Product-No. 20.157
LEYCO®-PROTECT 6 is used the chassis of trucks, cement silo trucks, ready-mix concrete mixers, construction machines, all machines and devices which are used in outside and industrial locations.
Furthermore LEYCO®-PROTECT 6 is used for sealing the back of metal formworks, preventing the adhesion of concrete and other contaminations.
The slip hazard which is associated with the use of liquid release agents is removed.
LEYCO®-PROTECT 6 can be removed with LEYCO®-BLITZ .
LEYCO®-PROTECT 6 is a polymer micro sealing wax for the surface sealing of metal, lacquered and plastic surfaces.
It forms a hard and skid-proof protective film, which protects against corrosion and which substantially simplifies cleaning. LEYCO®-PROTECT 6 can be polished up for a glossy appearance.
Density: 0.8 g/ml
Flash point: 33°C
Before application test the suitability of Protect 6 on an inconspicuous area. Clean the surface that will be applied wih Protect 6.
LEYCO®-PROTECT 6 should be applied in as thin and even a film as possible. A brush, hand sprayer or cloth is recommended for this.
Large surfaces will benefit from a sprayed application, whilst smaller areas can be coated with a cloth or brush.
The removal of the protective film can be made problemfree with LEYCO®-BLITZ. Conventional cleaning agents are not suitable for removing the Protect 6.
Protect from frost. Protected against fires in the carefully sealed container.
Minimum shelf-life 30 months.
Imflamable Injurious to health, could cause lung damage if swallowed. Do not inhale vapours. If swallowed do not induce vomiting, immediately seek medical assistance showing them the label.