LEYCO®-TP SH: Product-No. 20.535
LEYCO®-TP SH is a self-drying shampoo with intensive lather. It is used for trucks, buses and other heavy vehicles. Environmental dirt, oil, grease and other dirt picked up on roads is removed effectively, expediently and without any damage to the paint. The washing procedure is extremely “mild”. While the vehicle is being washed, the brushes are simultaneously self-cleaning. The product has a refreshing perfume.
May be used in every car wash which uses shampoo. It may also be applied manually.
At airports it is used for cleaning of ground equipment, buses and vehicles used on the runway.
Density (20°C): ~ 1,04 kg/ l (1 l = 1,04 kg)
pH Value: ~ 10
In carwash plants it is used undiluted. If the plant contains a dosing pump, the product is added to water in the course of washing. The pump should be adjusted to use approximately 30 – 60 ml of the product for one wash.
When washing manually, you may dilute the product in various proportions, depending on the dirtiness of the vehicle. Maximum mixing ratio is 1 : 100.
If applied to vertical surfaces, the product must be applied from the bottom upwards, in order to avoid any `straps` which might remain after washing. After you have shortly applied the product (max. 5 min.), wash the surface with a strong water jet or a high-pressure device.
Freezing does effect the quality of the product.
Water pollution class:
WGK 2 = heavy pollutant (producer‘s estimation)
WGK 1 = light pollutant (producer‘s estimation)
Easily dissolvable in the sewerage system if used in prescribed concentration.