LEYCO®-RM 31: Product-No. 20.175
The areas of application of LEYCO®-RM 31 are variously, e.g. foodstuffs sector, agriculture, industry, vehicle and tank cleaning.
LEYCO®-RM 31 removes fast and arrearsless heavy fat-, for oil-, soot and tar contamination from alkalisteady surfaces. If ambiguity exists over the alkali stability of the surface which can be cleaned, preliminary tests must be absolutely accomplished to the material stability.
The processing by means of HD devices takes place with 1-3%.
LEYCO®-RM 31 is a high-activity basic cleaner on basis of inorganic substances and Tensiden. LEYCO®-RM 31 is free from organic solvents and contains no chlorinated hydrocarbons.
Density: 1.36 g/cm3
Appearance: yellowish, clearly
Dilution: HD devices: 1-3 %
Vorspruehen: 1-25 %
pH value: 14
Depending upon contamination LEYCO®-RM 31 is laid on as Vorsprueh solution by means of Vorspruehgeraet (1 – 25 %) or by means of HD equipment (1 – 3%). Rinse after short impact time thoroughly with water. LEYCO®-RM 31 to dry up do not leave. LEYCO®-RM 31 was developed particularly for heavy contamination. For the maintenance cleaning by means of HD equipment or Vorsprueh equipment we recommend our product
LEYCO®-RM 81. One obtains most economic success by means of Vorspruehen with diluted LEYCO®-RM 31 and a following cleaning by means of plentifully clear water with vapor or HD equipment.
Frost-protected in the carefully closed container store.
Minimum shelf-life 30 months.
Contact with eyes and skin avoid. Splashes immediately with much clear water rinse off. Use rubber gloves by hand with use. Absolutely consider the danger references on the label. Rinse with eye contact thoroughly with much water and doctor consult.